Categories & Products Filter

MicroStepper Module PCB Mount 36VDC/2A

R1,829.61

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage: From 12Vdc up to 42Vdc
  • Phase Current: From 0.3Apk up to 2.4Apk
  • Logic Supply Voltage: 5Vdc
  • Control Mode: Step and Direction
  • Digital Inputs: 5 TTL/CMOS compatible: STEP, DIRECTION, ENABLE, STANDBY, RESET
    3 TTL/CMOS compatible: RS0, RS1, RS2 for the resolution setting
    2 analog for the phase current setting
  • Digital Outputs: 1 open collector: FAULT
  • Step subdivision: Selectable from full step to 1/2 step
  • Protections, Alarms and Diagnostics: Over and under voltage, short circuit phase to phase, phase to ground, phase-positive
  • Connections: Via solder pins
  • Size: 44.5(H) x 55(L) x 28.5(W) mm
Add to basket

MicroStepper Module PCB Mount 36VDC/1A

R2,655.54

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage:  From 12Vdc up to 42Vdc
  • Phase Current: From 0.15Apk up to 1.2Apk
  • Logic Supply Voltage: 5Vdc
  • Control Mode: Streaming via serial line and proprietary protocol
  • Special Features: TXON output for automatic RS485 flow control. Deferred execution of movements by Hardware Trigger
  • Digital Inputs: 2 TTL/CMOS compatible: ENABLE, RESET
    8 TTL/CMOS compatible: RX, TX, TXON, ADD0, ADD1, ADD2, ADD3, ADD4
    3 bidirectional TTL/CMOS compatible: IO0, IO1, IO2
    2 analog for the phase current setting
  • Digital Outputs:1 open collector: FAULT
    3 bidirectional TTL/CMOS compatible: IO0, IO1, IO2
  • Step subdivision: Selectable from full step to 1/128 step or automatic mode
  • Protections, Alarms and Diagnostics: Over and under voltage, short circuit phase to phase, phase to ground, phase-positive
  • Connections: Via solder pins
  • Size: 44.5(H) x 55(L) x 28.5(W) mm
Add to basket

MicroStepper Module PCB Mount 60VDC/ 6A

R3,104.42

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage:  From 22Vdc up to 85Vdc
  • Phase Current: From 1Apk up to 7.5Apk
  • Logic Supply Voltage: 5Vdc
  • Control Mode: Step and Direction
  • Digital Inputs: 5 TTL/CMOS compatible: STEP, DIRECTION, ENABLE, STANDBY, RESET
    3 TTL/CMOS compatible: RS0, RS1, RS2 for the resolution setting
    2 analog for the phase current setting
  • Digital Outputs: 1 open collector: FAULT
  • Step subdivision: Selectable from full step to 1/2 step
  • Protections, Alarms and Diagnostics: Over and under voltage, short circuit phase to phase, phase to ground, phase-positive
  • Connections: Via solder pins
  • Size:115.5(H) x 91(L) x 70(W) mm
Add to basket

MicroStepper Module PCB Mount 36VDC/ 2A

R3,409.65

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage:  From 12Vdc up to 42Vdc
  • Phase Current: From 0.3Apk up to 2.4Apk
  • Logic Supply Voltage: 5Vdc
  • Control Mode: Streaming via serial line and proprietary protocol
  • Special Features: TXON output for automatic RS485 flow control. Deferred execution of movements by Hardware Trigger
  • Digital Inputs: 2 TTL/CMOS compatible: ENABLE, RESET
    8 TTL/CMOS compatible: RX, TX, TXON, ADD0, ADD1, ADD2, ADD3, ADD4
    3 bidirectional TTL/CMOS compatible: IO0, IO1, IO2
    2 analog for the phase current setting
  • Digital Outputs:1 open collector: FAULT
    3 bidirectional TTL/CMOS compatible: IO0, IO1, IO2
  • Step subdivision: Selectable from full step to 1/128 step or automatic mode
  • Protections, Alarms and Diagnostics: Over and under voltage, short circuit phase to phase, phase to ground, phase-positive
  • Connections: Via solder pins
  • Size: 44.5(H) x 55(L) x 28.5(W) mm
Add to basket

MicroStepper Module PCB Mount 60VDC/ 6A

R4,899.92

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage:  From 22Vdc up to 85Vdc
  • Phase Current: From 1Apk up to 7.5Apk
  • Logic Supply Voltage: 5Vdc
  • Control Mode: Streaming via serial line and proprietary protocol
  • Special Features: TXON output for automatic RS485 flow control. Deferred execution of movements by Hardware Trigger
  • Digital Inputs: 2 TTL/CMOS compatible: ENABLE, RESET
    8 TTL/CMOS compatible: RX, TX, TXON, ADD0, ADD1, ADD2, ADD3, ADD4
    3 bidirectional TTL/CMOS compatible: IO0, IO1, IO2
    2 analog for the phase current setting
  • Digital Outputs:1 open collector: FAULT
    3 bidirectional TTL/CMOS compatible: IO0, IO1, IO2
  • Step subdivision: Selectable from full step to 1/128 step or automatic mode
  • Protections, Alarms and Diagnostics: Over and under voltage, short circuit phase to phase, phase to ground, phase-positive
  • Connections: Via solder pins
  • Size: 115.5(H) x 91(L) x 70(W) mm
Add to basket

MicroStepper Module PCB Mount 36VDC/ 1A

R1,883.48

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage:  From 12Vdc up to 42Vdc
  • Phase Current: From 0.15Apk up to 1.2Apk
  • Logic Supply Voltage: 5Vdc
  • Control Mode: Streaming via serial line and proprietary protocol
  • Special Features: TXON output for automatic RS485 flow control. Deferred execution of movements by Hardware Trigger
  • Digital Inputs: 2 TTL/CMOS compatible: ENABLE, RESET
    8 TTL/CMOS compatible: RX, TX, TXON, ADD0, ADD1, ADD2, ADD3, ADD4
    3 bidirectional TTL/CMOS compatible: IO0, IO1, IO2
    2 analog for the phase current setting
  • Digital Outputs:1 open collector: FAULT
    3 bidirectional TTL/CMOS compatible: IO0, IO1, IO2
  • Step subdivision: Selectable from full step to 1/128 step or automatic mode
  • Protections, Alarms and Diagnostics: Over and under voltage, short circuit phase to phase, phase to ground, phase-positive
  • Connections: Via solder pins
  • Size: 44.5(H) x 55(L) x 28.5(W) mm
Add to basket

MicroStepper Module PCB Mount 36VDC/2A

R2,350.31

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage:  From 12Vdc up to 42Vdc
  • Phase Current: From 0.3Apk up to 2.4Apk
  • Logic Supply Voltage: 5Vdc
  • Control Mode: Streaming via serial line and proprietary protocol
  • Special Features: TXON output for automatic RS485 flow control. Deferred execution of movements by Hardware Trigger
  • Digital Inputs: 2 TTL/CMOS compatible: ENABLE, RESET
    8 TTL/CMOS compatible: RX, TX, TXON, ADD0, ADD1, ADD2, ADD3, ADD4
    3 bidirectional TTL/CMOS compatible: IO0, IO1, IO2
    2 analog for the phase current setting
  • Digital Outputs:1 open collector: FAULT
    3 bidirectional TTL/CMOS compatible: IO0, IO1, IO2
  • Step subdivision: Selectable from full step to 1/128 step or automatic mode
  • Protections, Alarms and Diagnostics: Over and under voltage, short circuit phase to phase, phase to ground, phase-positive
  • Connections: Via solder pins
  • Size: 44.5(H) x 55(L) x 28.5(W) mm
Add to basket

MicroStepper Module PCB Mount 60VDC/ 6A

R4,127.85

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage:  From 22Vdc up to 85Vdc
  • Phase Current: From 1Apk up to 7.5Apk
  • Logic Supply Voltage: 5Vdc
  • Control Mode: Streaming via serial line and proprietary protocol
  • Special Features: TXON output for automatic RS485 flow control. Deferred execution of movements by Hardware Trigger
  • Digital Inputs: 2 TTL/CMOS compatible: ENABLE, RESET
    8 TTL/CMOS compatible: RX, TX, TXON, ADD0, ADD1, ADD2, ADD3, ADD4
    3 bidirectional TTL/CMOS compatible: IO0, IO1, IO2
    2 analog for the phase current setting
  • Digital Outputs:1 open collector: FAULT
    3 bidirectional TTL/CMOS compatible: IO0, IO1, IO2
  • Step subdivision: Selectable from full step to 1/128 step or automatic mode
  • Protections, Alarms and Diagnostics: Over and under voltage, short circuit phase to phase, phase to ground, phase-positive
  • Connections: Via solder pins
  • Size: 115.5(H) x 91(L) x 70(W) mm
Add to basket

DS Series Step & Direction 50VDC 1.4Arms Din Mount Micro Stepper Drive

R2,404.17
NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.
  • Power Supply Voltage:  From 18Vdc up to 50Vdc
  • Phase Current: From 0.3Arms up to 1.4Arms in increments of 0.1Arms
  • Control Mode: Step and Direction. Start/Stop
  • Digital Inputs: 4 optoisolated: STEP, DIRECTION, ENABLE, BOOST Operating from 3V up to 28V at constant current Each one NPN, PNP or Line Drive compatible.
  • Step subdivision: Microstepping. Selectable from full step to 1/128 step
  • STEP Max Frequency: 300KHz
  • Protections, Alarms and Diagnostics: Over and under voltage, thermal, Phase Motor interrupted Short circuit phase to phase, phase to ground, phase-supply, Univocal indication for each anomaly.
  • Connections: By functional removable terminal block. Section of cable up to AWG14
  • Size: 100(H) x 17.5(L) x 119(W) mm
Add to basket

DS Series Step & Direction 36VAC 1.4Arms Din Mount Micro Stepper Drive

R2,547.81

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage:  From 16Vac up to 36Vac
  • Phase Current: From 0.3Arms up to 1.4Arms in increments of 0.1Arms
  • Control Mode: Step and Direction. Start/Stop
  • Digital Inputs: 4 optoisolated: STEP, DIRECTION, ENABLE, BOOST Operating from 3V up to 28V at constant current Each one NPN, PNP or Line Drive compatible
  • Step subdivision: Microstepping. Selectable from full step to 1/128 step
  • STEP Max Frequency: 300KHz
  • Protections, Alarms and Diagnostics: Over and under voltage, thermal, Phase Motor interrupted Short circuit phase to phase, phase to ground, phase-supply, Univocal indication for each anomaly.
  • Connections: By functional removable terminal block. Section of cable up to AWG14
  • Size: 100(H) x 22.7(L) x 119(W) mm
Add to basket

DS Series Step & Direction 50VDC 4Arms Din Mount Micro Stepper Drive

R2,673.50

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage:  From 20Vdc up to 50Vdc
  • Phase Current: From 1Arms up to 4Arms in increments of 0.1Arms
  • Control Mode: Step and Direction. Start/Stop
  • Digital Inputs: 4 optoisolated: STEP, DIRECTION, ENABLE, BOOST Operating from 3V up to 28V at constant current Each one NPN, PNP or Line Drive compatible.
  • Step subdivision: Microstepping. Selectable from full step to 1/128 step
  • STEP Max Frequency: 300KHz
  • Protections, Alarms and Diagnostics: Over and under voltage, thermal, Phase Motor interrupted Short circuit phase to phase, phase to ground, phase-supply, Univocal indication for each anomaly.
  • Connections: By functional removable terminal block. Section of cable up to AWG14
  • Size: 100(H) x 17.5(L) x 119(W) mm
Add to basket

DS Series Step & Direction 36VAC 4Arms Din Mount Micro Stepper Drive

R2,835.09

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage:  From 18Vac up to 36Vac
  • Phase Current:  From 1Arms up to 4Arms in increments of 0.1Arms
  • Control Mode: Step and Direction. Start/Stop
  • Digital Inputs: 4 optoisolated: STEP, DIRECTION, ENABLE, BOOST Operating from 3V up to 28V at constant current Each one NPN, PNP or Line Drive compatible.
  • Step subdivision: Microstepping. Selectable from full step to 1/128 step
  • STEP Max Frequency: 300KHz
  • Protections, Alarms and Diagnostics: Over and under voltage, thermal, Phase Motor interrupted Short circuit phase to phase, phase to ground, phase-supply, Univocal indication for each anomaly.
  • Connections: By functional removable terminal block. Section of cable up to AWG14
  • Size:100(H) x 35(L) x 119(W) mm
Add to basket

DS Series Step & Direction 50VDC 8Arms Din Mount Micro Stepper Drive

R3,445.56

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage:  From 18Vdc up to 50Vdc
  • Phase Current: From 3Arms up to 8Arms in increments of 0.1Arms
  • Control Mode: Step and Direction. Start/Stop
  • Digital Inputs: 4 optoisolated: STEP, DIRECTION, ENABLE, BOOST Operating from 3V up to 28V at constant current Each one NPN, PNP or Line Drive compatible.
  • Step subdivision: Microstepping. Selectable from full step to 1/128 step
  • STEP Max Frequency: 300KHz
  • Protections, Alarms and Diagnostics: Over and under voltage, thermal, Phase Motor interrupted Short circuit phase to phase, phase to ground, phase-supply, Univocal indication for each anomaly.
  • Connections: By functional removable terminal block. Section of cable up to AWG14
  • Size:100(H) x 35(L) x 119(W) mm
Add to basket

DS Series Step & Direction 65VAC 3Arms Din Mount Micro Stepper Drive

R3,194.19

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage:  From 20Vac up to 65Vac
  • Phase Current: From 0.8Arms up to 3Arms in increments of 0.1Arms
  • Control Mode: Step and Direction. Start/Stop
  • Digital Inputs: 4 optoisolated: STEP, DIRECTION, ENABLE, BOOST Operating from 3V up to 28V at constant current Each one NPN, PNP or Line Drive compatible.
  • Step subdivision: Microstepping. Selectable from full step to 1/128 step
  • STEP Max Frequency: 300KHz
  • Protections, Alarms and Diagnostics: Over and under voltage, thermal, Phase Motor interrupted Short circuit phase to phase, phase to ground, phase-supply, Univocal indication for each anomaly.
  • Connections: By functional removable terminal block. Section of cable up to AWG14
  • Size:100(H) x 35(L) x 119(W) mm
Add to basket

DS Series Step & Direction 36VAC 8Arms Din Mount Micro Stepper Drive

R3,822.62

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage:  From 18Vac up to 36Vac
  • Phase Current: From 3Arms up to 8Arms in increments of 0.1Arms
  • Control Mode: Step and Direction. Start/Stop
  • Digital Inputs: 4 optoisolated: STEP, DIRECTION, ENABLE, BOOST Operating from 3V up to 28V at constant current Each one NPN, PNP or Line Drive compatible.
  • Step subdivision: Microstepping. Selectable from full step to 1/128 step
  • STEP Max Frequency: 300KHz
  • Protections, Alarms and Diagnostics: Over and under voltage, thermal, Phase Motor interrupted Short circuit phase to phase, phase to ground, phase-supply, Univocal indication for each anomaly.
  • Connections: By functional removable terminal block. Section of cable up to AWG14
  • Size: 100(H) x 35(L) x 119(W) mm
Add to basket

DS Series Step & Direction 90VDC 3Arms Din Mount Micro Stepper Drive

R2,924.87

NB: Minimum order quantity is 2 units and if a smaller quantity is required please contact sales@industratech.co.za for your prices.

  • Power Supply Voltage:  From 24Vdc up to 90Vdc
  • Phase Current: From 0.8Arms up to 3Arms in increments of 0.1Arms
  • Control Mode: Step and Direction. Start/Stop
  • Digital Inputs: 4 optoisolated: STEP, DIRECTION, ENABLE, BOOST Operating from 3V up to 28V at constant current Each one NPN, PNP or Line Drive compatible.
  • Step subdivision: Microstepping. Selectable from full step to 1/128 step
  • STEP Max Frequency: 300KHz
  • Protections, Alarms and Diagnostics: Over and under voltage, thermal, Phase Motor interrupted Short circuit phase to phase, phase to ground, phase-supply, Univocal indication for each anomaly.
  • Connections: By functional removable terminal block. Section of cable up to AWG14
  • Size: 100(H) x 17.5(L) x 119(W) mm
Add to basket